Kawasaki H2 Aluminum Swing Arms Interest in KZ 900-1000??

H2ken

Hi Guy's. First Time on forum, lifetime enthusist. My name is Ken and I build speed parts for vintage motorcycles. I have recently built some H2 swing arms, and thought there might be a few of us lurking on the site. I am active on the 2 stroke sites, particulary the Yamaha rd's. I also build swing arms for the 350,400,and Daytona series. I was considering building Z-1, and KZ swing arms if there was enough interest. The H2 swing arms in the pics below are for the early 72-73 models. They are built from 6061 aluminum, and Tight Tolerance Jig welded, next they are put in another jig and heat treated back to 6061 hardness, then media prepped, and hand wet sanded. There is also the option for anodizing black, blue, clear, red, gold, etc. I build these 1" longer than stock, with a 2-3/8 in axle slot, all stock parts bolt right on with the exception of the chain guard, which I will be making a trick aluminum part in the near future, the shock positions remain the same. Weighing in at a svelte 6lbs, brutally strong, they are a nice addition to a modified H2. I am located in Cypress CA, and make them right here in the USA! I sell the swing arm with a CNC cut rear brake control arm for $675.00 I have included some pics of the rd swing arms for your viewing pleasure. Thanks for looking. Feel free to contact me with any questions, or if you have interest in Z-1 900 or KZ swing arms. Thanks Ken