Search found 27 matches

Might be looking for a kit for a 1971 T350, there's nothing listed for that, would the kit for the 500 or the 250 be suitable?

Thanks Russ, will give it a go tomorrow

Hi all, am trying to get a carbie sorted out with regards to the float distance.
In the manual, the distance is measured from the top of the float to the flange on the carb, the diagram in the manual ...

Thanks for the link Dort.
Bloke I bought the bike off reckoned it was a 1971 but when it was first registered in NZ, it was as a 1973 according to the records.
The model also didn't come out in 1973 ...

Yello, trying to find a list or resource of which engine numbers were made in which years model for T350s. Cheers

have ordered one from the above links.
Sourced onr ex-Japan, $960 NZ, or from another web seller only $350 US.

Have got oil coming through now, will see how it goes with the pump pressure, cheers

Thanks for that info, will look into it.

Anyone know of a replacement diaphragm or petcock for a T350R?
Mine is leaking and it appears that the petcock is a complete unit.
Cheers

Yello, whats the best way to loosen the check valve in the oil lines on a T350?
Or unblock the line.
have started the motor and you can see where the oil is advancing along the tube in 3 of the line ...

Yello all, according to the manual, the spacers between the carbs and the barrels are tapered, anyone know which direction and by how much?
My spacers are parallel and make fitting the air hose diffi ...

Will keep you in mind, cheers

Have had a proper look around the K'N site, I'd just looked at the dual-flange filters.
Looks like the RU-2550 or the RC-2550 would fit, anyone fitted these?

Yello all, the tubes that lead from the airbox to the carbies on my t350 are pretty rigid and have previously had bits cut out so as to get a fit.
Does anyone know of some after-market filters that ...

ta for that tip, might give it a go