Search found 10 matches

Now the motors apart - I need pushrods too. I have plenty of C150 parts available if anyone is interested in trading anything. Let me know what c200 parts you have and what you need for your 150 Perh ...

No- it's this one (listed as a 1964)
http://www.hondaofcrofton.com/fiche_section_detail.asp

Looking for a kickstart shaft, a seat, a lowerer chain guard,and a front fender for 1965 C200 (90cc) Honda. Can anyone help?

I have a complete DT1f engine that is in parts. I dissasembled it and know the parts are fine with the exception of the cylinder bore. If someone needs anything from it let me know.

Good condition, 1700 miles. NOS tank and seat. Side panels a little faded but in good shape. Kill switch needs a new button so is fixed in the "on" position. Bike has original sales document ...

My experience is to take everything apart. Be very careful removing gaskets you can use them as patterns to cut new ones or if your lucky can use them again with a VERY thin, carefully applied sealer. ...

There's a carbon canister, and I think some kind of air injection involving hookups to the carb, plus some other little bits- I'd have to check the manual. When I bought my GB about 10 years ago the g ...

Looking for 37mm Forks with steel bottoms to fit a 1967 RH67 250 motocrosser.

I have a 1972 T500 that I want to paint the same color as the first new bike I bought (and no longer have). It was a 1976 GT250A. I remember it being called "Candy Orange" but looking at th ...

My GB has all the emission stuff removed. It has a Kerker pipe and a larger than stock Mikuni on it and I still have the stalling problem