Search found 622 matches

Well, I'm not smart enough to just print this, but go to your search engine, type hondacb360 brake diagram hit go or search and it will take you to a list, the first of which is the 360 parts fiche, ...

Allright, that did it, went to the shop, dug through several boxes and the trash bags to find a keyless ignition switch, which I labeled and stashed, now I'll forget where I put it.........Blue

I've been watchin the progress, looking pretty darn good, I used some refrigerator/appliance paint on a frame once and it held up real well, it's an epoxy and dries hard, I found that warming the ratt ...

You are right about the gun auction, took this beat up old 12 ga, single exposed hammer shotgun that I had allready looked up in a bluebook and in fine cond. without the broken firing pin mine had was ...

Greetings and welcome to the site. Glad your enjoying the GL, nice bikes they are. Lot's of good people and info here, so see you on the forums and good luck with the other project you have, it's grea ...

Yep, that's a preservation beauty, just read an article in the last Motorcycle Clasics Magazine about A guy that found one of the 80s era Hondas that was a school bike that Honda gave to schools for s ...

Ya gotta love it. Those old Nimbus were great bikes, I'd love to have one but not to many stateside, rugged and sturdy looking they are, would prefer one of them over a Guzzi anyday, or Beemer........ ...

Welcome to the site. Sounds like an interesting project, have you given any thought to finding another bike of similar size that runs, but looks like poop? I would check Craigslist to see what's out t ...

So, I'm glad the syringe worked for you, now the next question, bike is hard to move now? After it has set for a short time (10) minutes, does it roll better? if so then the caliper puck is probably ...

Well, been doing some research and found a schematic at servicehonda and yep, it's a case, but that's the whole description, apparently in stock and about $18.00, so probably going to check in a day o ...

Well, jeepurz, been doing some research and according to what info I have found the part is called a case, Honda part 35102-mc9-670, don't know why they call it a case but it just covers the ign. sw. ...

I have a 1985 Honda Nighthawk 450SC that is missing the plastic piece that goes below the tach/speedo and covers the top of the fork tubes and has an approx. 3/4" hole in it where the ign. switch ...

I won't get into detail here, but check the wanted item area, maybe one of you has this laying around.......Blue

Looks like you're off to a good start, nobody will mess with it up there on the roof will they? Perhaps a sign of some kind to deter those type people. In any case good luck with the project, keep the ...

A big hello and welcome from across the pond. Good info, good people, good times, pretty much sum up the site, glad you're with us, good luck with your projects and see you on the forums.............. ...